Mobile hard disk can not be accessed, prompting the function is not correct how to do?
Mobile hard disk can not be accessed, prompted by the function is not correct, processing methods:
Take off the hard disk box cover, after ten minutes, wait for the hard disk to cool down, and then plug in to try;
Check to see if it is not enough power supply, the general mobile hard disk connected to the computer on one side have 2 interfaces, connect them to the back of the computer usb port;
Plug it into someone else’s computer and try it out;
Maybe it’s a bad disk, look for a disk detection software, roughly determine the location of the bad disk, for example, it’s in the vicinity of 12g of the f-disk, and then use the partition software to divide the f-disk into 3 parts, 0~11.11~13.13~. Then just hide the 11~13 part.
All of the above do not work, may be the hard disk is bad, can only take to repair the hard disk place to see if they have a way.
How to solve the problem of incorrect function
Problem 1: The optical drive is inaccessible, prompting the function is incorrect, how to solve the optical drive is inaccessible, the function is incorrect
Because the system has installed Nero, the CD burning function of Windows has been disabled.
Click Start Run, type services.msc,open services, double-click IMAPICD-BurningCOMServerice service, change the startup type to automatic, restart.
Open My Computer, open the drive properties of the burner, and in the Burning tab, check Enable CD recording on this device.
Also, if the burner and the hard disk use the same cable, or if you have two burners installed, the problem described above can occur. It is recommended to use a separate cable for the burner and the hard disk. If you have two recorders, because Windows can only enable desktop CD recording for one of them, and the other one is in a non-enabled state, in the non-enabled state of the burner into the burning disk, will not automatically activate Nero, double-click to enter the prompt function is incorrect, as long as in the non-enabled state of the burner to enable the CD recording on this device can be checked. In addition, the CD does not automatically play the following solutions: 1, click “Start” select “Run”, type “gpedit.msc”, and run, open the “Group Policy”. “Group Policy” window;
2, in the left column of the “Local Computer Policy”, open the “Computer Configuration _ Administrative Templates _ System”, and then in the right column of the Under the heading “Settings”, double-click “Turn off autoplay”;
3. Select the “Settings” tab, and check the “Disabled “check button, and then in the “Turn off autoplay” box, select “All drives”, click “OK” button, exit the “Group Policy window. This is the method on the Internet, but I chose the unconfigured, after the selection of the good, you can try!
Problem two: prompted by the inaccessibility of the function is not correct how to access the mobile hard disk prompted by the function is not correct, indicating that at this time the hard disk hardware is working properly, the problem is in the file system or partition table, at this time you can through the following steps to solve the problem:
1) right-click on my computer, select Manage> Disk Management,
2) to confirm that the The removable hard disk is listed in there, remember its “diskx” x represents the number, the same as below
3) Under the system, press win+R to open the run dialog box, type “diskpart”,
4) continue to type “selectdiskx “clear, after which the removable drive will be initialized, and then continue to partition and format it for use. This action will delete the previous data of the removable disk.
Question 3: What to do if the function is incorrect, how to solve it, urgently check the format of the function call and whether the declaration is correct
Question 4: How to solve the problem when the computer opens the .exe program and shows that the function is incorrect. I have encountered a similar situation before and it turned out to be a virus.
Reinstallation can sometimes only temporarily solve the problem, a moment will not work;
Use 360 antivirus, the result killed a lot of useful things.
Solution, format the hard disk and reinstall the system!
Problem five: compressed file function is not correct how to do it may be your file format has a problem
Problem six: function is not correct how to solve the WINDOWSXP on the prompt: can not access the G:\, the function is not correct
symptoms burn DVD, every time you put the Empty disk put in, WINDOWSXP on the prompt: can not access G: \, the function is incorrect
Computer does not exist burner and CD-ROM hardware problems, because I directly use NERO can be successfully recorded.
Solution: It is caused by the fact that the CD burning function of windows xp is disabled after NERO is installed on the system.
1Click: Start-Run: services.msc
2Enter “Services”, double-click IMAPICD-BurningCOMServie service, change “Startup Type” to “Startup Type”. change “Startup Type” to “Automatic” and restart your computer.
3Open “My Computer”, open the drive properties of the burner, in the burning tab, check “Enable CD recording on this device” can be solved
Yesterday, when I wanted to burn a disk, the CD-ROM drive suddenly had the following message “The function is not correct” prompt, and check the CD-ROM properties of the CD-ROM used and the remaining space are 0, after finding a simple solution
1, switch to another account to enter (note that the switch is not logged off, such as there is no other account, please go to the control panel – create an account with the account);
2, from another account to enter the account, then select “Enable CD recording on this device” in the recording tab to solve the problem. 2, from another account to open the CD-ROM, no “function is not correct” prompt, and you can view the disk used and the remaining space;
3, and then cut the account to the account where you have the CD-ROM drive error prompts, open the CD-ROM there is no “function is not correct! “
*This solution is not effective for broken CD-ROM drives and disc quality problems
*This solution may not be effective for computer policy group settings and optimization error messages, but you may want to give it a try.
This solution may not be effective for computer policy group settings and optimization error messages
This solution may not be effective for computer policy group settings and optimization error messages.
Problem 7: What about incorrect functions? This may be due to the fact that after installing neroexpress on your system, the cd burning function is blocked.
Step 1: Open Run on your system, type services.msc, and a Service Settings window will pop up, find the imapicd-burningservices item, double-click on it, and change the startup type from disabled to automatic, and restart your system.
Step 2: Open my computer, select the drive properties of the burner, in the burning tab, the device to start cd recording on the front of the check, and then re-insert a blank CD, it can be displayed normally.
Problem 8: Installation of the “function is incorrect” this situation how to do open the “Run” dialog box, type: services.msc, click OK to open the “Services” dialog box, in the “Services (Local)” dialog box, in the “Services (Local)” dialog box, in the “Services” dialog box, in the “Services” dialog box, in the “Services” dialog box, in the “Services” dialog box, in the “Services” dialog box. In the “Services (Local)” list, find “IMAPICD-BurningCOMService”.
Let’s take a look at the description of this service: “Manages CD recording with ImageMasteringApplicationsProgrammingInterface (IMAPI). If this service is stopped, this computer will not be able to record CDs.If this service is deactivated, any services that depend on it will not start.”
The problem does seem to be here. Double-click on the IMAPICD-BurningCOMService to open its Properties dialog box, and change the “Startup Type” to “Automatic. Question 9: The installation CD appears to be an incorrect function, what does it mean and how to solve it You have to make sure that the CD is good, try it on top of another computer and see if it works! Thanks!
Problem 10: open the application, showing that the function is not correct how to solve ah ？？？？？ Computer experts to come in under 5 points indicates that you have a problem with the game. Has there been a recent upgrade patch or any changes to the software? It could be that this situation affects. Reinstall the game can be.