How to view computer ip and remote connection port
1, Click on windows icon in the bottom left corner of your computer. Type cmd in the search box
2. Search for cmd in the folder and click on it.
3, in the DOS command type: ipconfig.
4, enter the computer’s ip address can be seen.
5, in the DOS command type: netstat-an
6, you can see the computer’s, port, as shown in the figure. This port is used for server network port settings.
How to set the port number of windows remote desktop login
Based on personal needs, the use of servers, may be built on the server many virtual spaces, through different ports to enter can be seen is different. Also in order to increase the security of the server, for the server remote desktop default port number 3389 is easy to be scanned by intruders, invasion, threatening the security of the server. Today we will teach you how to set the remote login port.
Use the registry to modify the port
Open “Start ¡ú Run”, type “regedit”, open the registry, Win7 to run regedit with administrator privileges (this file in the system disk system directory)
These are the first time that I have used the registry to modify the port.
Enter the following path: [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\TerminalServer\Wds\rdpwd\Tds\tcp], under the “PortNumber” key corresponds to the port number.
Then open [HKEY_LOCAL_MACHINE\SYSTEM\CurrentContro1Set\Control\ TenninalServer\WinStations\RDP-Tcp], change the value of PortNumber (the default is 3389) to port 5854 () change it to the same number as the one above. After the modification is complete, restart the computer and use port 5854 when logging in remotely in the future.
Using software to modify the port
Using a piece of software, as shown below xg3389, you can more directly modify the port
Open the software, we see a port number, here is the remote port can be directly modified to use this method is very convenient and quick. It also avoids the unknowledgeable people messy settings and cause some can not access the Internet can not log in and some other problems
In the port that input box fill in the port number you want, and then click to confirm the change, it will pop up a completed box, and then OK, and then click on the restart of the server, you can complete the modification.
Win7 remote desktop port how to modify
We are using the Win7 system, the system has a remote desktop function can be remote control of our computer. But this function is more likely to cause attacks, generally in order to avoid this situation we will modify the port number. The following is the method to modify the remote desktop port in win7, let’s take a look at it.
Modify the method as follows:
1, click the Win7 start menu, in the “Search Programs and Files” box, type: regedit.exe and then enter.
2, in order to expand: [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\TerminalServer\Wds\rdpwd\Tds\tcp] in the expansion of the tcp after the right side of the key to find the following picture.
3, double-click on the “PortNumber”, click on the “decimal”, and then modify the “value of the key value” in the 3389, for you want to change to the port number you want.
4. Click “OK” to close the firewall after the change, and finally restart your computer to take effect.
The above introduction is about win7 modify the remote desktop port method. If you also want to modify can try the above method Oh, I hope to help you.