Where to look at Lenovo computer bios

Lenovo computer how to enter the bios settings interface

Generally, we do not need to bios settings, but if our computer problems need to reinstall the system, or to refresh the battery settings, you need to bios settings, like me just bought a Lenovo computer, simply do not know how to Lenovo computer to enter the bios settings interface. Here for you to organize the Lenovo computer to enter the bios interface of the three ways, hurry to see it.

Lenovo computer how to enter the bios settings interface

Method 1: F1

Part of the Lenovo laptop models as well as Thinkpad models, in the boot interface crazy press 【F1】(or 【Fn+F1】), you can enter the bios interface.

Scope of application:

Lenovo full range of desktops (Note: products released after 2010).

IdeaCentre full range of all-in-one PCs.

ThinkPad full range of notebooks.

Zhao Yang K49, E49 and higher models (Note: all models released after 2012).

LenovoV480, B480, M490 and higher models (Note: All models released after 2012).

Method 2: F2

Most of Lenovo laptops, press [F2] (or [Fn+F2]) crazily in the boot interface, you can enter the bios interface, different models of Lenovo laptop BIOS interface is different.

Scope of application:

IdeaPadYZG series models of the full range of laptops (early US full series).

LenovoErazerZNY full series notebook.

ZhaoYang series K47, E47 and earlier products.

Yangtian series V470, B470 and earlier products.

Early Sunrise and Tianyi full series notebooks.

Method 3: “NOVO” button

1. Connect the power adapter or battery under power off state, then find and press the “NOVO” button. (Reminder: Some models do not support this method of operation if you cannot find this button.)

2. Wait for a moment for the screen to appear as shown below, and use the cursor to move to the third item, EnterSetup, and enter, to enter the BIOS setup interface.

Scope:

Application:

Part of the notebook products released after 2012, including: IdeaPad full series, LenovoG series.

Some IdeaPadU or S series, YOGA/FLEX full series products.

LenovoErazerZNY full range of notebooks.

Summary:

1, F1 (or Fn + F1)

2, F2 (or Fn + F2)

3, novo button

All of the above is to provide you with the Lenovo computer how to enter the bios setup interface of the specific method of operation, I hope that you will help you~!

Where is the Lenovo laptop bios setup?

BIOSSETUPUTILITY is one of the very important features on your computer’s motherboard, and you can use this program to select different installation parameters.

After entering CMOSSETUP by pressing a specific key when the computer is booting up, there are many other menus, and BIOSSETUPUTILITY is just one of them.

For example:

1. config: Set the configuration of the computer.

2. date/time: Set the date and time.

3. password: Set security features.

4. startup: Set the startup device.

5. restart: Restart the system.

Generally there are mainly about the computer’s important parameter settings, as well as the parameters of the relevant devices.

How to enter the BIOS interface

Press the power button to turn on the computer, and press the F1 or F2 key (quickly and intermittently) to enter the BIOS interface before the Lenovo logo appears during the boot process. (If no response try FN+F1)

Setup Legacy Boot Ideas

Step 1: Find OSOptimizedDefault, switch UEFI mode to Legacy and save it

Step 2: Find CSM, turn on Compatibility Mode

Step 3: Change the boot selection to LegacyOnly

Detailed tutorial

1, enter the Bios interface, press the right arrow key on the keyboard (→) to select to “Exit”; press the lower arrow key on the keyboard (↓) to select to ” OSOptimizedDefault”, press “enter” to select “Disabled”

( OSOptimizedDefault option can be understood as the switch between UEFI and traditional BIOS);

2, prompted by a warning, select “Yes”, press the Enter key (Enter) to confirm;

3, press the F9 key on the keyboard, the recovery of the BIOS defaults dialog box, select “Yes”, press the Enter key (Enter) to confirm; (OSOptimizedDefault option for Enabled, press the F9 key to restore the UEFI defaults, OSOptimizedDefault option for Disabled, press the F9 key to restore the UEFI defaults. (If the OSOptimizedDefault option is Enabled, press F9 to restore the default value of UEFI; if the OSOptimizedDefault option is Disabled, press F9 to restore the default value of legacy BIOS)

4. Press the left arrow key (←) on your keyboard to enter the Startup interface, select the CSM option, and then press the Enter key on your keyboard to set “CSM” to “Enabled”. Enabled”, press the Enter key (Enter) to confirm; (CSM: Compatibility Support Module CompatibilitySupportMole)

5, press the lower directional key (↓) on the keyboard to select the Boottmode option, press the Enter key (←) to enter the Startup interface, select the CSM option, press the Enter key (Enter) on the keyboard, set the “CSM” to “Enabled”, press the Enter key (Enter) to confirm. The settings appear, press the lower arrow key on the keyboard (↓) to select to “LegacyOnly, or Legacyfirst press the Enter key (Enter) to confirm;

6, the modified situation, as follows:

7, and finally. Press F10 on the keyboard, the save dialog box appears, select “Yes”, press the Enter key (Enter) to confirm, save and exit, the computer will restart