Do you have to press f1 to turn on your HP desktop computer?

HP desktop computer to press F1

Hello, welcome to use HP products ~

The boot appears to press the F1 way to enter the system, usually hardware auto-detection of the impact of data errors, there is no other setup can be canceled directly out of the F1 prompts, later you first try to turn off the computer after removing the

External power

The power cord, press and hold the power switch and so on 8, 9 seconds to release the static electricity and then access the power cord to boot if the phenomenon remains. The first thing you should try is to turn off the computer and remove the external power cable, press and hold the power switch for 8 or 9 seconds to release the static electricity and then plug in the power cable to turn on the computer, if the phenomenon is still the same.

Press

F10

Enter the BIOS, select the file column under the restore

default and press yes, and then press F10 to select yes to save and exit, you respectively according to the two methods to try to ~

Hope the above reply is helpful to you, if the problem is not solved welcome to again! I hope the above reply is helpful to you, if the problem is not solved, you are welcome to ask again.

How to solve the HP desktop computer boot every time to press f1

I do not know when you open the computer, will suddenly encounter a such a strange problem, the computer shows that press f1 to enter the system. The computer appears this phenomenon is due to what causes it? Many people feel confused about this, do not know if the computer is bad. In fact, this is a very common problem, how to cancel the computer boot f1. Then next, we will analyze why there will be a press f1 to get into the system and the reasons and solutions.

One, why the computer will appear to press f1 in order to enter the system

1, when our computer motherboard battery is not charged, our computer will often appear this problem. Because the computer’s motherboard battery is mainly to control our BIOS system, want to enter the computer desktop and the system is required to start the BIOS to carry out. The computer’s motherboard battery is dead, you need to press f1 in order to start the backup program and energy.

2, there is another reason is that a system of the computer is broken or the computer installed two systems. These can be fixed by setting it up.

Second, the computer boot press f1 cancel method

1, want to cancel the f1 to enter the system is very simple, in the boot quickly press delete, this is that we can enter the BIOS system settings, we in the settings of the flopy change to disabel on the line. You have to remember to save and exit, otherwise it won’t work.

2. The second way is to enter the BIOS system settings when booting, change the DriveA item to None, save and exit. Both of these methods require a reboot, so keep that in mind.

3, there is a way to replace the motherboard battery, if the above two ways can not change this status quo, then certainly is the motherboard battery is not charged. Directly change a new battery can be.

4, if you change the battery or not, then we have to check their driver and hard disk is not damaged, the driver is not installed and system damage can also lead to boot need to press f1. If the driver is damaged, then reinstall a driver or ask a professional to repair. If the hard disk is faulty, you can consider using software to repair it, or you can take it to a repair store to replace the hard disk.

Three reasons why you have to press F1 to get into the system:

A… In the computer does not have a floppy disk drive, but in the BIOS set up to detect the floppy drive option, that is, the computer itself does not have a floppy drive, but the BIOS in the boot is automatically detect the floppy drive, in the case of the BIOS can not detect the floppy drive on the request to press the F1 to continue; floppy drive in the BIOS is usually named Floppy, or the default Drive.A for the floppy drive;

The second. The motherboard battery is insufficient or damaged, the motherboard battery is used in the case of computer power loss to ensure that the motherboard BIOS power supply, so as to save the user’s BIOS setup information, once the motherboard battery is insufficient or damaged the system will certainly prompt Alert! Systembatteryvoltageislow (battery power is low) requires you to solve or prompts The systembatteryvoltageislow(low battery) requires you to solve the problem or prompts “CMOSbatteryfailed”(battery failure), in the case of unresolved will prompt you to press F1 to continue, this is to ensure that the BIOS information will not be lost;

Three. System hard disk damage, when in the prompt “3rdMasterHardDisk:S.M.A.R.T. StatusBADBackupandReplace”, said the system detected the computer’s third hard disk damage, it is recommended that you back up important data in a timely manner, when there is no solution to the problem, it will also prompt you to press F1 to continue. When there is no solution to this problem, you will also be prompted to press F1 in order to continue;

Four. CPU fan operation is not normal, boot prompts “CpuFanError” (CPU fan is not normal), which indicates that the CPU fan may have stopped, if you continue to run the CPU because of the temperature is too high may result in a crash, blue screen, burned out and so on. The situation, in the absence of a solution to the problem before, will also prompt you to press F1 to continue;

V. Not set the motherboard CMOS time and date, the beginning of the prompt “CMOSDate/TimeNotSet” (not set the CMOS time and date), BIOS will also be prompted to need to press F1 to enter the system!

HP desktop computer to install the system to press f several?

How many times do I have to press F to install a system on my HP desktop computer?

Hewlett-Packard motion is F2 and F10 two keys to enter the BIOS setup startup items, you go in to the USB flash drive or CD-ROM drive as the ground body startup items can be, and then you install the system can be

HP desktop computer dx2390 press what key to install the system

Refurbish the system, will only change the system of the computer’s C-disk, such as the computer’s D- and E- and F-disk inside the file and the things will not be less. The system will only change the system in the C drive of the computer.

There are three ways to reinstall a system:

The first is to install the system on a hard disk. You can use your computer’s hard disk to install the system as long as the computer system has not crashed, you can access the system, and you can download things. The method is as follows:

Depending on your computer configuration, it is perfectly possible to install a WIN7 operating system. Use the computer hard disk to install the system, you can install the system of WIN7, the specific operation is as follows:

1. First of all, go to the most stable and most complete system 114 network to go to win114./win7/dngs-xiazai-7375. to download the 64-bit operating system of WIN7:

2. will be downloaded WIN7’s 64-bit operating system, extracted to the D disk, do not unzip Do not unzip it to the C drive.

3. Open the unzipped folder, double-click the “GHO Hard Disk Installer”, and in the window that opens, click “Install”.

4. In the window that appears, the path to the ghost image archive will be added automatically, select the partition slot that needs to be restored to, the preset is the C drive, and then click the “OK” button to automatically install it.

The second method is to install the system from a CD-ROM. This is a great way to get a better understanding of your computer’s BIOS settings. To do this, you need to have the following options available to you: 1. “AdvancedBIOSFeatures”

2. After entering “AdvancedBIOSFeatures”, find the first boot device option that contains the word “First”, “FirstBootDevice”

3. “FirstBootDevice” option, select the “CDROM” Enter can be configured to set up a good, press the keyboard “F10” key to store and The computer will then reboot itself, and the rest will be an automatic installation of the system.

These are the steps for setting up a BIOS boot. The BIOS settings are different for each computer, so you can refer to them. Once you learn it, you can use the CD to install the system.]]

The third is to install the system with USB disk. It is suitable for those who know a lot about computer BIOS settings. After watching the tutorial on how to make a USB flash drive you will be able to install the system with a disk. Go to the computer store to u.diannaodian./jiaocheng/index. to learn how to install the system.

How to reinstall system on HP desktop computer?

Hello, thank you for choosing HP products.

Because we don’t know the specific model of your computer and the specific information of the operating system you want to install, we can’t make an accurate judgment, we suggest that you provide the detailed information of the machine, and we can also target to help you determine the problem.

Note: Usually you can find a sticker with the HP logo on the main chassis of a commercial desktop computer product, which has two sets of numbers, S/N (Serial) and P/N (Proct), in the following format:

S/N (Serial): a total of ten English and numeric combinations

P/N (Proct): a combination of letters with the characters # and # AB2 (Proct). AB2 character at the end of the word

I hope the above reply can help you.

Methods for installing a homework system on a computer are as follows:

The first is to install the system on a CD-ROM. Suitable for a very good understanding of the computer BIOS settings to be able to. The first step is to install the system on a CD-ROM, which is suitable for people who know a lot about BIOS settings. After entering “AdvancedBIOSFeatures”, find the first boot device option that contains the word “First”, “FirstBootDevice”

3. “FirstBootDevice” option, select the “CDROM” Enter can be configured to set up a good, press the keyboard “F10” key to store and The computer will then reboot itself, and the rest will be an automatic installation of the system.

These are the steps for setting up a BIOS boot. The BIOS settings are different for each computer, so you can refer to them. Once you learn it, you can use the CD to install the system.]]

The second one is to install the system with USB disk. It is suitable for those who know a lot about computer BIOS settings. After watching the tutorial on how to make a USB flash drive you will be able to install the system with a disk. Go to the computer store to u.diannaodian./jiaocheng/index. to learn how to install the system.

The third is hard disk to install the system. Specific operations refer to the system ghost base installation ghost008./jiaocheng/ system tutorials, as long as the computer system does not crash, can enter the system, and can download things you can use the computer hard disk to install the system.

Desktop computers can choose to install the system with a USB flash drive, Steps:

1, use the u depth u disk boot disk creation tool to create a good startup USB flash drive

2, ghostwin7 system image file

Step 1: create the completion of the u depth u disk boot disk

Step 2: download the GhostWin7 system image file package, into the u disk boot disk

Third step: the computer mode to change to ahci mode, otherwise the installation of the Win7 system will be completed the phenomenon of the blue screen

(1) the formal installation steps: the depth of the u disk boot disk to connect to the computer, reboot when the boot interface appears to press the startup shortcut keys, wait for the system to enter the depth of the u main menu, select [02] execution of the u disk boot disk, and then select [02] to execute the depth of the u disk boot disk, and then select [02] to execute the depth of the u disk boot disk. The U depth Win8PE installation maintenance version (new machine), enter the key to confirm

(2) into the pe system, will pop up pe system comes with the system installation tool “U depth PE installation tool”, click “browse” to select the u disk stored in the win7 system image file, installation tool will automatically load the system image package required to install the file, we just need to select the partition to be installed, and the installation tool will automatically load the system image package. We just need to select the partition slot for the installation, and then click the “OK” button

(3) Do not modify the pop-up inquiry window, directly press “OK”

(4) Wait for the disk to complete the formatting, the installation of the Win7 image file will be carried out

(5) After the completion of the above operation, just restart the computer for the subsequent installations, and then the Win7 image file. After completing the subsequent setup, you will be able to enter the Win7 system

Refer to the tutorial::ushen./jiaocheng/upzwin7.

How to install the system on HP desktop computers

I don’t know if you are installing it with a CD-ROM or a USB flash drive, but if it’s a CD-ROM, press ESC when you turn on your computer with the HP logo on it, and a couple of startup options will appear, so choose which one of the DVD’s to press Press enter. If it’s a U, it’s the same as above, choose the brand name of your USB flash drive. After that, and other machines to install the system is the same steps

HP desktop computer install what system is good

according to the computer configuration to choose the system

dual-core 2.0 or more memory 2g is generally 32-bit system

dual-core 2.0 or more memory 4G or more (including 4G) is generally choose 64-bit system

win7 – win10 Choose according to their own preferences

HP desktop computer with a 360 rechargeable system can be

System disk installation stability

HP desktop computer, have to press F1 to enter the system

Recharge the system

How to use the CD-ROM to install the system to the HP desktop computer

If it is a disk version of the installation method is as follows:

The first step is to set up the optical start:

The so-called

How to set it up:

1. Start your computer and hold down the DEL key (some computers press F1, F2, F4, F11, ESC, but DELETE is the most used) until the BIOS setup window appears (usually a blue background with yellow text).

2. Select and go to the second item, “BIOSSETUP”. Inside, find the item or group containing the BOOT text, and find the “FIRST”, “SECEND”, “THIRD” three items in sequence, which represent FIRST”, “SECEND” and “THIRD”, which stand for “FIRST START”, “SECOND START” and “THIRD START” respectively. Here we set “CD-ROM drive”, “floppy drive” and “hard disk drive” in that order. (If you don’t see these three E-texts on this page, the option menu to the right of the BOOT is usually “SETUP”, so you can see them by pressing enter.) You should select “FIRST” and hit enter, and then select CD-ROM from the submenu that comes up. Press enter again. (Some computers are to find BOOT —-bootsettings—bootdevicepriority–enter (OK) – 1STBOOTDEVICE—DVD/CDROM–enter (OK))

3. After selecting a good startup mode, press the F10 key, and the E dialog box will appear. After selecting the boot method, press F10, the E dialog box appears, press “Y” (can be omitted), and enter, the computer automatically reboots, proving that the changed settings have taken effect.

Step 2: Install XP from CD

Put in the XP installation CD before rebooting, and press Enter when you see the word CD appear at the bottom of the screen. This is the only way to boot from the CD, otherwise the computer will start reading the hard disk, which means it will skip the boot from the hard disk.

XP system disk after the boot is the blue background of the installation interface, the system will automatically analyze the computer information, do not need any operation, until the monitor screen becomes black, followed by a blue background of the Chinese interface.

The first thing that comes up is the XP system agreement, so press F8 (to agree to the agreement), and then you’ll see a list of all the hard drive partitions, with instructions in Chinese. Select the C drive, press D to delete the partition slot (remember to make a backup of the useful files on the C drive beforehand), the location of the C drive will be changed to “Unpartitioned Slot”, and then press C to create a partition slot in the original location of the C drive (i.e., the location of the “Unpartitioned Slot”), and the size of the partition slot doesn’t need to be adjusted. The size of the partition slot does not need to be adjusted. After that, the original C drive location becomes “new unused”, press enter to continue.

The Format Split Slot Options page may appear next, and it is recommended that you select “Format Split Slot with FAT32 (Fast)”. Press the Enter key to continue.

The system starts formatting the C drive very quickly. Formatting is followed by analyzing the hard drive and the previous WINDOWS operating system, which is also very fast, and then copying the archive, which takes about 8 to 13 minutes (depending on the configuration of the machine).

After the copying of the archive is complete (100%), the system will automatically reboot, at which point, when the CD-ROM ….. is seen again, there is no need to press any keys. When you see the CD-ROM again, you don’t need to press any keys to let the system boot from the hard disk, because part of the installation file has already been copied to the hard disk (note: the CD-ROM cannot be removed at this point).

A colorful XP installation interface with a blue background appears, with an installation progress bar and remaining time displayed on the left side. The starting value is 39 minutes, also depending on the configuration of the machine, and the usual installation time for a P4, 2.4 machine is about 15 to 20 minutes.

At this point, until the installation is complete and the computer restarts automatically, there is no need to do anything other than enter the serial number and computer information (feel free to fill it in), and hit enter 2 or 3 times. The system will complete the installation automatically.

Step 3: Driver Installation

1. After rebooting, remove the CD-ROM, boot the computer from the hard drive, and enter the XP setup window.

2. Press “Next”, “Skip”, select “Do not register”, and “Finish”. “

3. Enter the XP system desktop.

4. Right-click on the desktop, select “Properties”, select the “Display” tab, click the “Customize Desktop” item, check the “My Computer” box. The first step is to select “My Computer”, and then select “OK” to exit.

5. Return to the desktop, right-click “My Computer”, select “Properties”, select the “Hardware” tab, select “Device Manager”. Device Manager”, which is a computer management window of all the hardware, in which all the front of the yellow question mark + exclamation point option on behalf of the hard drive is not installed, double-click to open its properties, select “reinstall the driver”, put the appropriate when the driver CD-ROM, select the “automatic installation”. “Automatic installation”, the system will automatically recognize the appropriate driver and installation is complete. (AUDIO for the sound card, VGA for the display card, SM for the motherboard, you need to first install the motherboard driver, such as the absence of SM represents no installation). Reboot the computer after installing all drivers. The driver installation is now complete.

Why HP desktop computer boot are to press F1 to enter the system, any of you know how to change?

Causes and solutions to boot press F1 to enter the system:

1) To press F1 when booting up the computer This is caused by a BIOS setup error, which is usually caused by the following situations.

1, there is no floppy drive but the floppy drive is enabled, you can disable the floppy drive.

Press DEL to enter BIOS, select: STANDARDCMOSFEATURES

DRIVEA: set to None

DRIVEB: set to None

Press F10 to save, enter “Y” to enter. and enter “Y” to return to the car.

2, memory problems or CPU frequency has been changed, replace the memory, restore the BIOS defaults can be.

3, the original hanging two hard disk, in the BIOS set to dual hard disk, and then remove one of the time but forgot to change the BIOS settings back, will also appear this problem.

Just restore the BIOS defaults.

4, if the above settings are invalid, may be the COMS battery is not charged, open the host, key off the button COMS battery, replace the new battery can be.

5, to restore the BIOS defaults:

Turn on the computer or restart the computer hold down the DEL key, enter the BIOS;

Find LoadFail-SafeDefaults, press the arrow keys to select and enter, prompted to determine whether or not to press Y, enter. Finally select Save&exitstep (save settings), directly press F10 can also be, press Y to enter automatically restart, the settings take effect (the computer’s different settings are not the same, this is the desktop settings).

2) In addition, your computer is stuck like this:

Repeatedly switch on and off to try, put a period of time to try, really can not be reinstalled on the system it, if you can not reinstall, spend $ 30 to the maintenance of the repair there to find maintenance people to help you.

Just be careful that your computer doesn’t get stuck, get a blue screen, or shut down suddenly, and it won’t do that when you turn it on.

Please follow up with me if you have any questions.

HP computer boot press f1,HP brand machine boot press f1

1.HP computer boot F10 means: HP laptop boot screen just lit, continuous rapid click “F10”, you can enter the BIOS setup interface.

2. HP laptop to enter the BIOS setup interface can also use the method: laptop boot screen just lit, continuous rapid click “ESC”, enter the boot menu options, and then click “F10” The BIOS setup interface can be accessed by clicking on the “F10” button, which will bring you to the BIOS setup interface.

3. Extended information: BIOS location: In fact, it is a set of programs solidified into the computer on the motherboard on a ROM chip, which saves the computer’s most important basic input and output programs, self-test program after boot and system startup procedures, it can be read and written from the CMOS specific information about the system settings.

4.?BIOS Main Function: Its main function is to provide the computer with the lowest level and most direct hardware settings and control.

5. In addition, BIOS provides some system parameters to the operating system.

6. Changes to the system hardware are hidden by the BIOS, and programs use BIOS functions rather than directly controlling the hardware.

7. Modern operating systems ignore the abstraction layer provided by the BIOS and directly control hardware components.

8. Today, this system has become the target of a number of virus Trojans.

9. Once this system is compromised, the consequences are unimaginable.

Why do I have to press F1 to turn on my HP computer

This is a small problem:

This is the computer boot can not detect the floppy drive, so you have to press the F1 key to skip the detection in order to enter the system, the newer computers have abandoned the floppy drive, only the old computer motherboards will be boot detection of this item. Solution: boot press the ESC key – into the BIOS setup – select (BootUpF1oopySeer) item – and then select (Disabled) item, Disabled item is to prohibit the computer from detecting the floppy drive on the computer, if you choose (Enabled) item is to allow boot detection of the floppy drive, so if you don’t want to press the F1 key to enter the computer system, in the settings! So if you don’t want to press F1 to enter the computer system, you should choose Disabled to disable the detection, so it’s OK. You can also ignore it.

Because many motherboards have different settings for the English characters, but they are generally the same, you can refer to the English comparison settings above.