Computer how to see the SSD model h3>
Question 1: How do you know your computer to install that kind of SSD model from the results of the software test, your system is still is the Western Digital 500G mechanical hard disk to start, did not see the solid state drive. It is possible that in the BIOS is not set correctly, the solid state drive to do the slave disk, it is also possible that the system is not yet recognized.
Question 2: How to see what model SSD is SSD-Z, CrystalDiskInfo can view the model of SSD.
Question 3: How to view the computer’s solid-state drive through the “My Computer” Properties, find the device manager in the disk drive option,
Look at the number of the hard disk, generally starting with the SSD are solid-state drives
But not all solid-state drive “all start with SSD.”
Just look up the model number under that option on Baidu. For example, MZ7TD128HAFV, and then you’ll know if it’s SSD or not.
Two, install hardware detection tools, such as LU Master.
1, the computer to install LU Master, run.
2, check the hard disk options, if there is a detailed description of the SSD description is installed solid state hard disk.
Question 4: How to see what kind of SSD should be installed in the computer suggests that you install the Chinese version of ASSSDBenchmark to see, not only can see the brand and model of the SSD, but also can test the speed of the SSD, whether the 4k alignment and so on!
Question 5: How to look at the hard disk model to see the hard disk model
See the hard disk on the number ah, the English do not know, the number at a glance to understand, either how many thousands (in units of 100M), or dozens of (in units of G)
Hard disk labeling meaning at present, we have seen in the market most of the hard disk Seagate ( Seagate), Maxtor (Maxtor), WesternDigital (WesternDigital), Hitachi (HITACHI) and Samsung (Samsung) and several other manufacturers of products. Recently, new hard disk products have been on the market, and the definition of hard disk numbering by each manufacturer has changed somewhat. Many consumers have had difficulty recognizing the current hard drive numbers of various brands.
Because each hard drive number represents a specific meaning, the hard drive number is like an “ID card” for us consumers. Through these complex numbers, we can interpret the hard drive capacity, speed, interface type, cache and other performance indicators, and this information is very helpful to us to buy their own hard drive products. The following author on the market mainstream hard disk products, detailed introduction of each manufacturer’s latest hard disk number law.
The Seagate hard disk numbers on the market are as follows:
ST “ST” stands for “Seagate”, which means Seagate in Chinese. This is found at the beginning of any Seagate hard disk product number.
Stands for hard disk form factor. “1” stands for a 3.5-inch full-height drive, “3” for a 3.5-inch half-height drive, and “4” for the now-obsolete 5.25-inch drive.
Consisting of 3 to 4 digits, it represents the capacity of the hard disk in 100MB, for example, “1200” means that the capacity of this hard disk is 100MB x 1200 = 120GB, and “800” means that the capacity is 80GB.
Represents the hard disk logo, which consists of a primary logo and a secondary logo:
The first number is the primary logo, which represents the number of platters in a normal IDE hard disk. For example, “2” means that two platters are used in the drive.
The second number is the secondary symbol, which is the hard disk’s auxiliary symbol. The secondary symbol is valid only when the primary symbol is the same or invalid. It is generally used to indicate the generation of the hard disk, with a higher number indicating a higher generation, meaning that the drive is newer.
Consisting of one to three letters, it represents the type of hard disk interface. Ordinary desktop hard disk is relatively simple, but if you include the current and early SCSI hard disk, its meaning is more complex, here only introduces the current mainstream desktop hard disk:
“A” stands for UltraATA, that is, the ordinary IDE/EIDE interface, which is the majority of desktop hard disk used in the A” stands for UltraATA, the normal IDE/EIDE interface that most desktop hard drives use; “AS” stands for SerialATA150, the Serial ATA1.0 hard disk interface.
To give you an example: from a hard disk marked “ST3120022A” number, we can know that the hard disk is Seagate’s 3.5-inch half-height, using two hard disk platters, the total capacity of 120GB UltraATA interface hard disk. In addition, other characters printed on the drive can also bring us some useful information, for example, “7200.7” means that this is Seagate’s new single-disk 80GB hard drive product. There is also the new “Barracuda 7200.7 Plus” series. All of these products have 8MB of cache and are available in either SerialATA150 or UltraATA100 interfaces, and are currently only available in 120GB and 160GB.
Previously, Maxtor hard drives were always numbered with 7-digit characters. But starting with the DiamondmaxPlus9, Maxtor added 6 more characters to the original hard drive numbering, thus increasing the hard drive numbering from the original 7 to 13 digits. But for now, it is still the first 7 digits that are really useful for us to recognize the hard disk. The 7-digit hard disk numbering takes the following form:
Represents the hard disk’s product family model number, as Maxtor has …… >>
Question 6: How to check what model of SSD is suitable for your computer SSDs don’t have a model number and can be generic. Now the solid state hard disk, are 2.5 inch serial hard disk, any desktop, notebook can be used. As long as your computer is not a decade-old model, there is no problem.
Please follow up if you have any questions, if you are satisfied, please adopt.
Question 7: How do I see the size of my computer’s hard disk model type? The solution to view the format of the hard disk is as follows:
1. Use the system comes with the function to view.
1, press WIN + E, open my computer, right-click a disk drive, select Properties, you can view the format of individual hard disk partitions.
2, press WIN + E, open my computer, right-click on Computer, select Manage, and then select Disk Management, you can detect the format of all partitions of the hard disk. As shown in the figure below: all partitions of this hard disk are formatted as NTFS.
Two, use hard disk tools to detect and view.
Such as the use of DISKGENIUS and other tools to detect the hard disk. As shown in the figure below: all partitions of this hard disk are formatted as NTFS.
Question 8: How to see if the computer hard disk is a solid state hard disk model with software measurement. LU Master, aida64 can.
But the cottage disk is often not measured.
Question 9: How to see if the computer installed a solid state hard disk hard disk is hardware, can see and touch, remove the chassis side panel, look at the standard settings can be.
Alternatively, you can download Lu Masters to check the hardware, and there is a report out after the check.
Such as: detection is complete – click hardware detection – hard disk information can be.
Question 10: How about the capacity of the SSD in the computer to see the next hard disk model. If installed on the computer can be in my computer to find the device interoperability, the list of disk drives in the hard disk model, to the Internet to find out how big the hard disk.
How to see the SSD model number?
Materials/tools: Asus Windows 10 system.
The specific operation has the following steps:
One, right-click on the computer desktop “this computer (my computer)”.
Select “Manage” and click on it.
Three, in the “Computer Management” interface to find the left side of the “Device Manager” click to enter.
Four, select “Disk Drives” click on the next step.
Fifth, you can see the model number of the solid-state drive (with the “SSD” logo, it is a solid-state drive).