What are the common commands for whole house custom cad

cad mapping commonly used basic commands

cad mapping commonly used basic commands

cad mapping commonly used basic commands, Cad is a professional engineering design class need to use to the software, can be used to draw professional drawings, can be used in various industries, to learn CAD to learn inside the various commands, the following look at the cad mapping commonly used basic What are the commands.

cad drawing commonly used basic commands1

1, CAD drawing commands

POINT (PO): point

LINE (L): straight line

XLINE (XL): constructive line

PLINE (PL): polyline

MLINE (ML): multi-line

SPLINE (SPL): the line of the first line of the second. SPLINE (SPL) : Spline curve

POLYGON (POL) : Positive polygon

RECTANGLE (REC) : Rectangle

CIRCLE (C) : Circle

ARC (A) : Arc

DONUT (DO) : Circle

ELLIPSE (EL): ellipse

REGION (REG): face field

MTEXT (MT): multiline text

BLOCK (B): block definition

INSERT (I): insertion of a block

WBLOCK (W): definition of a block file

DIVIDE (DIV): fixed number of equal parts

MEASURE (ME): fixed distance equal parts

BHATCH (H): fill

TABLE (TB): table

2, CAD modification commands

COPY (CO): copy

MIRROR (MI): Mirror

ARRAY (AR): Array

OFFSET (O): Offset

ROTATE (RO): Rotate

MOVE (M): Move

ERASE (E): Delete

EXPLODE (X): Decompose

TRIM (TR) : trim

EXTEND (EX) : extend

STRETCH (S) : stretch

LENGTHEN (LEN) : straight line lengthening

SCALE (SC) : proportional scaling

BREAK (BR) : break CHAMFER (CHA) : chamfer

FILLET (F): chamfer

PEDIT (PE): polyline editing

DDEDIT (ED): modify the text

3, CAD dimensioning commands

DIMLINEAR (DLI): straight line labeling

DIMALIGNED (DAL): aligned labeling

DIMRADIUS (DRA): radius annotation

DIMDIAMETER (DDI): diameter annotation

DIMANGULAR (DAN): Angle annotation

DIMCENTER (DCE): center of circle annotation

DIMORDINATE (DOR): Coordinate labeling

DIMARC (DAR): arc length labeling

DIMJOGGED (DJO): radius bending labeling

QLEADER (LE): quick elicitation of the labeling

DIMBASELINE (DBA): baseline labeling

DIMCONTINUE (DCO ): continuous labeling

DIMSTYLE (D): labeling style

DIMEDIT (DED): Edit labeling

DIMOVERRIDE (DOV): Replacement of the labeling system variables

QDIM: fast labeling

cad drawing commonly used in the basic commands2

1, drawing commands:

PO,* (point)

L,* (straight line)

XL,* (ray)

PL,* (polyline)

ML,* (polyline)

SPL,* (Spline Curve)

POL,* (orthogonal polygon)

REC,* (rectangle)

C,* (circle)

A,* (arc)

DO,* (doughnut)

EL,* (ellipse)

REG,* (face field)

MT,* (multiline text)

T,* (multi-line text)

B,* (block definition)

I,* (insertion of block)

W,* (Define Block File)

DIV,* (Fixed Equal Division)

ME,* (Fixed Distance Equal Division)

H,* (Fill)

2. Modify commands:

CO,* (Copy)

MI,* (Mirror)

AR,* ( Array)

O,* (Offset)

RO,* (Rotate)

M,* (Move)

E,DEL,* (Delete)

X,* (Breakdown)

TR,* (Trim)

EX,* (Extend)

S,* (Stretch)




F,*(Round Corners)

PE,*(Polyline Edit)

ED,*(Edit Text)

3. Window Zoom:

P,*PAN (Pan)

Z + space + space,* real-time zoom

Z,* local zoom

Z + P,* return to the previous view

Z + E, show the full picture

Z + W, show the window to select the part of the window

4, dimensional annotation:

DLI,* (straight line annotation)

DAL,* (aligned annotation)

DRA,* (radius labeling)

DDI,* (diameter labeling)

DAN,* (angle labeling)

DCE,* (center labeling)

DOR,* (point labeling)

LE,* (quick lead labeling)

DBA,* (baseline labeling)

DCO,* (continuous labeling)

D,* (labeling style)

DED,* (editing labeling)

DOV,* (replace the labeling system variables)

DAR, (radian labeling, CAD2006)

DJO, (bending labeling, CAD2006)

5, the object features

CH* modify the characteristics “Ctrl + 1”)

MA,* (attribute matching)

ST,* (text styles)

COL,* (set the color)

LA,* (layer manipulation)

LT,* (line)

LTS,* (Line Scale)

LW,* (Line Width)

AL,* (Alignment)

EXP,* (Output to Other Formats)

IMP,* (Input to Files)

OP,PR* (Customize CAD Settings)

PU,* (Purge Junk)

PU,* (Purge Trash)

PU,* (Purge Trash) <

RE,* (regenerate)

REN,* (rename)

SN,* (snap raster)

DS,* (set polar axis tracking)

OS,* (set snap mode)

PRE,* (print preview)

TO,*R (toolbar)

V,* (named view)

AA,*AREA (area)

(B) Common CTRL shortcuts

[CTRL] + O (open the file)

[CTRL] + N, M (new file)

[CTRL] + P (print the file)

[CTRL] + S (save) File)

[CTRL] + Z (Abort)

[CTRL] + X (Cut)

[CTRL] + C (Copy)

[CTRL] + V (Paste)

[CTRL] + B (Raster capture)

[CTRL] + F (Object capture)

[CTRL] + G (Grid capture)

[ CTRL] + G (Raster)

[CTRL] + L (Orthogonal)

[CTRL] + W* (Object Tracking)

[CTRL] + U* (Polar Axis)

(C) Frequently Used Function Keys

[F3] * (Object Capture)

[F7] * (Raster)

[ F8] Orthogonal

cad mapping commonly used basic commands 3

1, drawing bar on the number under the first command is – straight line, shortcut key L, regardless of case. Straight line command is our most commonly used commands, but also the foundation of the foundation of the drawing.

2, the second command is – construction line. Shortcut key XL, it is for the next . Reproduction, mirroring, etc. as a benchmark straight line, the dotted line does not belong to the contour line of the figure, generally as a graphic of a point as the center of the axis.

3. The third command is – polyline. Shortcut key PL, it consists of multiple line segments (can be straight lines, can also be arcs) to form a whole line segment. If you want to select a part of the line segment, you must first break it down. Usually used in mapping, even when doing topographic maps need it, so it is a very important command.

4, the fourth command is – positive polygon. The shortcut key POL, as the name suggests, can draw polygons, click on the command, enter the number of sides, and then select the inner tangent circle or outer tangent circle, you can draw

5, the fifth command is – rectangle. Shortcut key REC, you can quickly draw a rectangle width, this is also a very common command.

6, the sixth command is – arc. Shortcut key ARC, draw arc command can quickly draw an arc, schematic doors and other places are very commonly used.

The above is the CAD drawing bar before the six basic commands introduced, I hope this article can help you!

What are the commonly used CAD shortcut commands for interior design?

In the process of using Hao Chen CAD software for interior design, the commonly used CAD shortcut key commands are as follows:

CAD commonly used shortcut commands

In CAD software operation, for the convenience of the user, the use of shortcut keys instead of the mouse.

You can use keyboard shortcuts to issue commands, complete the drawing, modify, save and other operations.

These command keys are CAD shortcuts. So what are the cad commands? The following is a complete list of commonly used CAD commands, shortcuts and command descriptions, take a look!The second part of the acad.pgp file defines the command aliases.

Using Notepad or any text editor that saves files in ASCII format, users can edit acad.pgp to change existing aliases or add new ones. To open a PGP file, on the Tools menu, click Customize, Edit Custom Files, Programmer’s Guide, Programmer’s Guide, Programmer’s Guide, Programmer’s Guide, Programmer’s Guide, Programmer’s Guide, Programmer’s Guide, Programmer’s Guide, Programmer’s Guide, and Programmer’s Guide. “(acad.pgp).

This file can also be introduced with a semicolon (;) to indicate that a text shortcut is an alias for a command. In addition express utility aliasedit command can modify the pgp file so-called shortcut commands, is AutoCAD in order to improve the speed of drawing shortcuts defined, which uses one or a few simple letters to replace the commonly used commands, so that we do not have to memorize many long commands, and do not have to perform a command in order to perform a command, in the menu and the toolbar to search for hiding.

All the defined shortcut commands are saved in the ACAD.PGP file (ACAD.PHP is stored in the autodesk folder SUPPORT subdirectory under the system disk, the quick operation, directly select the menu: Tools – Customize – Edit Custom File – Program Parameters pgp, modify the file and save it, and then reload it by typing reinit on the command line! [1]), we can modify the contents of the file to define their common shortcut commands.