What is the reason for the unstable read rate of the hard disk?
The reasons are as follows:
(1) Temperature, the high temperature will lead to an increase in the error rate, because the wrong data requires a re-transfer, so it will lead to a very slow read rate, 50 degrees even if it’s very high, more than 60 degrees, then it is only a matter of time before the scrap.
(2) Turning off the UDMA transfer protocol in Windows will slow down the hard disk.
(3) The speed of a hard drive is also related to disk fragmentation and other computer components.
Solutions for unstable hard disk read speeds:
Users can check the control panel – system – device manager, then check the properties of the hard disk, check the master-slave hard disk UDMA status, and in addition, please check the UDMA settings in the system BIOS.
You can try to antivirus or format the hard disk. P.S. A hard drive is one of the main storage media of a computer and consists of one or more disks made of aluminum or glass. The disks are covered with a ferromagnetic material. Hard disk has solid state drive (SSD disk, new style hard disk), mechanical hard disk (HDD traditional hard disk), hybrid hard disk (HHD a piece of traditional mechanical hard disk based on the birth of a new hard disk). ssd uses flash memory particles to store, hdd uses magnetic discs to store, hybrid hard disk (hhd: HybridHardDisk) is the magnetic hard disk and flash memory integrated into a hard disk. HHD:HybridHardDisk is a type of hard disk that integrates magnetic hard disk and flash memory. The vast majority of hard disks are stationary drives, permanently sealed in a hard disk drive.
There are only a few problems with hard disks.
1, the hard disk itself. Such as: physical failure (disk body appears bad, or 0 track damage), this kind of failure if not serious, you can use the partitioning tool software to shield the bad channel. Serious on the scrap. Software failure (hard disk 0 track data is rewritten, resulting in hard disk can not be used), this kind of failure through the special brush equipment and software, rewrite the correct data can be restored to normal.
2, power failure, power supply instability or insufficient power supply, directly leading to the hard disk work instability, this kind of failure, you can try to change a power supply.
Mechanical hard disk read/write speed becomes slow how to do?
Mechanical hard disk read/write speed slowdown may have a variety of reasons, such as:
Insufficient hard disk space: If the hard disk space is used too much, it will lead to hard disk read/write speed slowdown. It is recommended to clean up useless files or purchase a hard disk with a larger storage capacity.
Hard disk interface problems: If the hard disk interface is faulty or loosely connected, it will also affect the hard disk read/write speed.
Hard drive partitioning: An unreasonably partitioned hard drive can lead to scattered files, which can affect read and write speeds.
Computer virus infection: Computer virus infection can take up system resources, resulting in slower read/write speeds on the hard disk.
Hard disk aging: hard disk used for a long time, there may be mechanical parts aging, software damage and other problems, affecting the read and write speed.
It is recommended to check for the above problems and consider replacing the hard disk if they cannot be resolved.
How to solve the slow read/write speed of mobile hard disk?
Slow read/write speed of a removable hard disk may be caused by bad sectors or file system corruption on the hard disk. You can try to repair your removable drive using the following methods:
Use the Windows built-in hard disk repair tool. All you need to do is right-click on the removable drive you want to repair in My Computer/This PC, select Properties-Tools-Start Checking, and then select Repair Errors Automatically.
Use the Chkdsk utility. You can type “chkdskX:/f/r” (X is the drive letter of the removable drive) in the command prompt and then press Enter to execute it, which can detect and repair file system errors and bad sectors on the removable drive.
Use professional hard disk bad sector detection software. You can download some free software such as HDTune, DiskGenius, MHDD, etc. to scan and repair bad sectors on your removable hard disk. These software have detailed tutorials and interface instructions, so you can choose the right software and features according to your needs.
All of the above methods have the potential to preserve data, but may also result in data loss or corruption, so be sure to back up important data before performing any operations. If none of the above methods solves the problem, we recommend that you contact a professional or replace the removable drive with a new one.
How to solve the mobile hard disk reading speed becomes abnormally slow?
1. Excessive disk fragmentation. Excessive fragmentation of the hard disk can lead to slow read and write speed of the hard disk, we can optimize the speed of the hard disk by removing the fragmentation of the disk. The first step we need to take is to right-click on our computer’s system disk and click Properties. The second step is to find a Disk Cleanup option in the General section of our Properties and click on it to see the computer calculating how much space is available on the disk. The third step is to delete the files that can be cleaned up, and then our hard disk reading and writing speed will become faster. But if the hard disk is not too much debris caused by the slow reading and writing speed of the hard disk, this method is the symptom not the root of the problem.
2. Virus files. Sometimes our disk contains some virus files, these files will make our hard drive slow. This situation does not have to worry about, directly using antivirus software to the hard disk to carry out a thorough antivirus can be. Download a 360 Defender one-key antivirus on the finish, and then go to clean up the junk files, restart the computer on the line.
3. Hard disk bad channel. There is a possibility that the hard disk reading and writing speed is slow because our hard disk has a bad channel. Bad channels are generally divided into logical and physical bad channels, are not difficult to deal with. Directly download a such software: HDTune. then run the software can solve this problem, the specific operation according to the prompts on the line. But there may be because the hard disk itself is damaged, if the hard disk itself is damaged, you can backup the data, and then replace a new hard disk. After the replacement, the speed will be much faster, generally more than two years of hard disk is best to replace it.
Expanded information:
1. The computer hard disk is the computer’s main storage device. Hard disk (Hong Kong and Taiwan called hard disk, English name: HardDiskDrive abbreviation HDD full name Winchester-style hard disk) consists of one or more aluminum or glass platters. These platters are covered with a ferromagnetic material.
2. The vast majority of hard disks are stationary drives, permanently sealed and secured in a hard disk drive. Early hard disk storage media were interchangeable, but today’s typical hard disk is a fixed storage media that is sealed inside the drive (except for a filter hole to equalize air pressure).
3. As development progressed, removable hard disks also appeared and became more popular and varied. Most of the hard disk installed on the microcomputer, due to the use of Winchester (Winchester) technology and is called “Winchester hard disk”, or simply “Winchester disk”. The so-called Winchester disk is actually a technology, this technology is located in Campbell, California, USA by IBM Winchester Street Institute of research and development, it was first used in 1973 in the IBM 3340 hard disk memory, so this technology is called Winchester technology.
How to fix a slow hard disk
The problem of a slow hard disk can be caused by a variety of reasons, you can try the following methods to fix it:
Clean up disk space: Insufficient space on the hard disk can lead to a slow hard disk, you can delete temporary files, unnecessary applications and files to free up disk space.
Check for disk errors: Using the Disk Checker tool that comes with Windows, you can check for hard disk errors and fix them.
Optimize hard disk performance: You can use disk defragmentation tool to optimize hard disk performance, defragmented files in the disk can improve read and write speed.
Update drivers: Updating the drivers of the hard disk can solve the problems related to hardware compatibility and improve the performance of the hard disk.
Check for disk damage: If none of the above methods work, it may be because the hard drive itself is physically damaged and needs to be repaired or replaced by a professional.